dimensions in inches and (millimeters) version: a06 mbr3035pt - MBR30150PT 30.0 amps. schottky barrier rectifiers to-3p/to-247ad features plastic material used carries underwriters laboratory classifications 94v-0 metal silicon junction, majority carrier c onduction low power loss, high efficiency high current capability, low forward volt age drop high surge capab ility for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications guardring for overvoltage protection high temperature soldering guaranteed: 260 o c/10 seconds,0.17(4.3mm)from case mechanical data cases: jedec to-3p/to-247ad molded plastic body terminals: pure tin plated, lead free. solderable per mil-std-750, method 2026 polarity: as marked mounting position: any mounting torque: 10 in. - lbs. max weight: 0.2 ounce, 5.6 grams maximum ratings and electrical characteristics rating at o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol mbr 3035 pt mbr 3045 pt mbr 3050 pt mbr 3060 pt mbr 3090 pt mbr 30100 pt mbr 30150 pt units maximum recurrent peak reverse voltage v rrm 35 45 50 60 90 100 150 v maximum rms voltage v rms 24 31 35 42 63 70 105 v maximum dc blocking voltage v dc 35 45 50 60 90 100 150 v maximum average forward rectified current (see f1g. 1) i (av) 30 a peak repetitive forward current (rated v r , square wave, 20khz) at tc=105 o c i frm 30 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 200 a peak repetitive reverse surge current (note 2) i rrm 2.0 1.0 a maximum instantaneous forward voltage at (note 1) i f =15a, tc=25 o c i f =15a, tc=125 o c i f =30a, tc=25 o c i f =30a, tc=125 o c v f 0.60 0.82 0.72 0.75 0.65 0.85 0.75 0.95 0.92 1.02 0.98 v 1.0 maximum instantaneous revers e current @ tc=25 o c at rated dc blocking voltage per leg(note 2) @ tc=125 o c i r 20 15 0.5 10 ma ma voltage rate of change at (rated v r ) dv/dt 10,000 1,000 v/us maximum thermal resistanc e per leg(note 3) r jc 1.4 o c/w operating junction temperature range t j -65 to +150 o c storage temperature range t stg -65 to +175 o c notes: 1. 2.0us pulse width, f=1.0 khz 2. pulse test: 300us pulse width, 1% duty cycle 3. thermal resistance from junction to case per leg free datasheet http:///
tj=25 c f=1.0mhz vsig=50mvp-p 0 mbr3035pt-mbr3045pt mbr3050pt & mbr3060pt mbr3090pt-MBR30150PT ratings and characteristic curves (mbr3035pt thru MBR30150PT) fig.3- typical instantaneous forward characteristics per leg instantaneous for ward current . (a) 0.6 0.8 1.0 1.1 0.9 0.7 0.5 0.4 0.3 0.2 0.1 0 1.2 0.1 0.01 1 10 50 forward voltage. (v) pulse width=300 s 1% duty cycle tj=25 c 0 tj=150 c 0 fig.4- typical reverse characteristics per leg instantaneous reverse current .(ma) 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage. (%) 0.001 0.1 0.01 1 10 50 fig.6- typical transient thermal impedance per leg transient thermal impedance. ( c/w) o 1 0.01 0.1 10 100 0.1 10.0 1 100 t, pulse duration. (sec) fig.5- typical junction capacitance per leg junction cap acitance.(pf) 0.1 1 10 100 100 1,000 5,000 reverse voltage. (v) version: a06 mbr3035pt-mbr3045pt mbr3050pt & mbr3060pt mbr3090pt-MBR30150PT mbr3035pt-mbr3045pt mbr3050pt-MBR30150PT fig.2- maximum non-repetitive forward surge current per leg peak for ward surge current . (a) 1 10 100 50 100 0 150 250 200 300 number of cycles at 60hz tj=tj max. 8.3ms single half sine wave jedec method fig.1- forward current derating curve average for ward current . (a) 0 50 100 150 0 6 12 18 24 30 case temperature. ( c) o resistive or inductive load mbr3035pt-mbr3045pt mbr3050pt-MBR30150PT tj=25 c 0 tj=125 c 0 free datasheet http:///
|
